What to Check if Your Hot Water Service is Not Functioning
What to Check if Your Hot Water Service is Not Functioning
Blog Article
What are your opinions with regards to What Would Cause My Electric Water Heater to Stop Working??
Many contemporary residences make use of an electrical water heater for their heating unit, as a result of its convenience as well as convenience of use. However, much like any other electric appliances, issues may arise with its usage, suddenly. It can be truly irritating to awaken to a cold shower instead of a hot one or having your bath with water that isn't warm adequate or perhaps too hot. Whatever the case may be, water heater problems can be rather stressful. The good news is, we've made a list of possible options to your hot water heater concerns. There are a number of factors that could cause a lot of these issues, maybe a concern with the power supply, the electric heating element, or the thermostat. Before doing anything, ensure you shut off the major power supply for safety and security. Whatever the issue is, getting it dealt with need to not pose too much of a problem if you comply with these actions:
Inspect Your Power Supply:
As standard as this might appear, it is really necessary. Without adequate power, your water heater will not work. So the first thing to do when your water suddenly stops working is to confirm that it isn't a power problem. Check if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the issue, simply turn it off and on again. Replace any broken or worn-out fuse. Test the appliance with power after these changes to see if it's now working.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, after that attempt looking into your burner if it is still functioning. Check each of your burner to make sure the problem isn't with any of them. If any of them is damaged, change that component and after that inspect whether the hot water is back on.
Check Your Thermostat:
If your hot water heater still isn't working or the water coming out isn't hot sufficient, you might require to inspect the temperature settings on your top thermostat. Make certain the breaker is switched off prior to doing anything. Open up the gain access to panel and press the red button for temperature level reset over the thermostat. This ought to help heat the water. Transform the breaker back on as well as check if the trouble has actually been resolved.
Call A Specialist:
If after changing all defective parts and also resetting your temperature level, the water heater still isn't working, you may require to call a professional plumber for a professional point of view. The issue with your heater could be that the cold and hot faucets have been switched over or it might be undersized for the amount of warm water required in your home. Whatever the instance may be, a professional plumber would certainly assist solve the trouble.
Final thought
Water heater issues are not always significant. A lot of them result from small issues like a blown fuse or damaged heating element. Changing the malfunctioning components ought to suffice. Nevertheless, if you are still unable to fix the problem, give a call to your local plumber to come to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
As a devoted person who reads on Hot Water Heater Repair, I imagined sharing that piece of content was important. Make sure you take the opportunity to share this blog posting if you enjoyed it. Thank you for your time. Please visit our website back soon.
Or Book Technician Here
Report this page